Carbide Tip Tools

Cemented carbide tools are available as brazed tipped tools and throw away tips held in specially designed tool holders.

Standard shapes of carbide-tipped turning and facing tools are shown in the Figs. Carbide tipped cut off and boring tools are also available. these tools are resharpened as needed using special silicon carbide and diamond wheels.

ISO Carbide Tool Types

  • ISO 1 straight turning tool
  • ISO 2 Cranked turning tool
  • ISO 3 Offset facing tool
  • ISO 4 Wide nose square turning tool
  • ISO 5 Offset turning and facing tool
  • ISO 6 Offset side cutting tool
  • ISO 7 Recessing tool (parting tool)
  • ISO 8 Boring tool
  • ISO 9 Corner boring tool (finishing)

ISO Carbide tools Geometry

  • ISO 1 Straight turning tool
Straight Turning Tool
Straight Turning Tool
  • ISO 2 Cranked turning tool
Cranked Turning Tool
Cranked Turning Tool
  • ISO 3 Offset facing tool
Offset Facing Tool
Offset Facing Tool
  • ISO 4 Wide nose square turning tool
Wide Nose Square Turning Tool
Wide Nose Square Turning Tool
  • ISO 5 Offset turning and facing tool
Offset Turning and Facing Tool
Offset Turning and Facing Tool
  • ISO 6 Offset side cutting tool
Offset Side Cutting Tool
Offset Side Cutting Tool
  • ISO 7 Recessing tool (parting tool)
Recessing Tool
Recessing Tool
  • ISO 8 Boring tool
Boring tool
Boring tool
  • ISO 9 Corner boring tool (finishing)
Corner Boring Tool
Corner Boring Tool

The carbide tools are specified according to

(1) the operations (rough and finish)
(2) right hand or left hand
(3)material being turned and machining conditions.

error: Content is protected !!